Iron Kong from Chaotic Century
|Maximum Speed||150 km/h|
|Weapons||Anti-Zoid Six-Shot Missile Launcher, Ten-Shot Self-Guided Rocket Bomb Launcher(2 in the HMM versions), Iron Hammer Knuckles (2), TVM Two-Shot Tactical SSM Launcher|
|Equipment||Composite Sensor Unit|
The Iron Kong was the second large-scale Zoid created by the Zenebas Empire, after the Red Horn. The Iron Kong was created specifically to counter and defeat the Helic Republic’s Gojulas. The Iron Kong featured super-thick armour invulnerable to most of the Gojulas’ weaponry. Additionally, the Iron Kong’s load of long-range missiles allowed it to attack from outside the range of most of its opponent’s weapons.
While relatively slow (but still twice as fast as the Gojulas), the Iron Kong is incredibly agile due to its construction. Additionally, the gorilla-like form and fully functional hands gives it the ability to climb and grasp objects, as well as pick up and throw things. Additionally, the Iron Kong can deliver devastating punches.
The Iron Kong MK-2 enhances the Iron Kong's performance by adding a thruster unit to its back. This thruster pack allows the Zoid to suddenly shift its position, enhancing its speed and agility, while allowing the Zoid to make long, booster-assisted leaps. Finally, a guidance unit is built into the Zoid's shoulders, enhancing the performance and accuracy of the Zoid's various missile weapons.
The further upgraded Iron Kong MK-2 Limited not only includes the improvements of the Iron Kong MK-2, but also enhances the Zoid's weapons. The Zoid's main missile launcher is replaced by a long-ranged heavy Hyperbeam launcher capable of felling smaller Zoids in a single blast. Additional weapons are added to the Zoid, further increasing is firepower. Finally, despite the added mass, the Zoid's systems are refined and improved, increasing its maximum speed to 170 km/h.
Battle Story AppearancesEdit
The Iron Kong was first deployed in battle by the Zenebas Empire in ZAC 2030. The Empire sent a force of the first 150 Iron Kongs to strike at the Republic, penetrating deep into their territory. For the next few years, prior to the introduction of the Ultrasaurus, the Iron Kong would pose a severe threat to the Helic Forces.
In ZAC 2035, the Empire introduced a new model of Iron Kong, the Iron Kong Mk-2 Limited. This model featured a thruster backpack, allowing the Zoid to make rocket-assisted leaps, along with expanded weaponry. This model proved to be too expensive for mass production, with only a few produced. These machines would be issued only to the Empire's top aces and commanders, who would be able to get the most out of their enhanced performance. Emperor Zenebas himself piloted a Mk II Limited at one stage.
A slightly downgraded version that removed the new weapons, but retained the thruster pack, entered mass production as the Iron Kong MK-2. The Iron Kong and its derivatives stayed in service until the fall of the Zenebas Empire in ZAC 2049, with the survivors being incorporated into the Guylos Empire’s army.
At some stage after ZAC 2056, the Guylos Empire began mass production of a new Iron Kong model, based on the original version without the Mk II’s thruster pack. Iron Kongs served with the Guylos forces during their invasion of the Western Continent. Despite being an old design, the Zoid was effective against the Helic forces. Many Iron Kongs were upgraded with thrusters and guidance units, making them the equivalent of the older Iron Kong Mk IIs.
The Prozen Knights, the private army of Guylos regent Gunther Prozen used their own version of the Iron Kong. Based on the older Mk II Limited, and retaining all its enhancements, this version designated as the Iron Kong PK. The Knights launched a coup in the Guylos Capital in ZAC 2101, and were successful in defeating the Guylos Forces there and the invading Helic army. However, the bulk of the Prozen Knights were wiped out when Prozen’s Deathsaurer exploded, ironically after being defeated by Colonel Schwarz's own Iron Kong.
Chaotic Century and Guardian ForceEdit
The Iron Kong first appeared in Zoids: Chaotic Century, reserved for use by high-ranking Guylos officers, though the mercenary Rosso later acquired one (illegally) to replace his Red Horn. Karl Schubaltz piloted an Iron Kong that sported a unique colour scheme and mounted on its right shoulder the CP-03 Gatling gun used primarily by the Dark Horn and Red Horn in place of the standard weapon, though in Guardian Force it would be further upgraded to and addressed as the Iron Kong MK-2. Lieutenant Hardin, Prozen's right hand woman, also used an Iron Kong in defense of the Guylos Capital. In episode 7 of Zoids: Guardian Force, Karl, under Rease's mind control, fought in his Iron Kong against his younger brother Thomas' Dibison.
Despite the Iron Kong's capabilities, the Zoids were often rather easily disposed of. A cliché emerged, especially in Guardian Force, that the average Iron Kong pilot was both an incompetent pilot and leader, with Karl and Rosso proving to be the only exceptions.
In Zoids: New Century, Harry Champ is seen to have in his extensive collection of Zoids at least two Iron Kongs: one standard model, and one Iron Kong SS. However, neither of these ever sees combat. Harry and his team would, however, eventually use modified Iron Kongs in several battles.
The Champ Team's Iron Kongs first appeared in episode 9, where they are purchased by Harry's sister, Mary, and used in a battle against the Blitz Team to claim their Liger Zero. Despite a common perception and similar appearance, the Champ Team's Kongs are not Iron Kong PKs, and are even initially misidentified by Jamie Hemeros, who then corrects himself and identifies them as "Alamazer M1896es." How the "Alamazer M1896" differs from the Iron Kong PK is never explained, though it appears to lack the tubes connecting the shoulder- and wrist-mounted cannons to the chest.
The Iron Kongs fought well against the Liger Zero Jager, but were defeated by the Schneider. The Champ Team would also use their Iron Kongs in the Royal Cup, but would never actually see any combat; Harry was too engrossed in seeking out Leena Toros to bother fighting. Harry later attempted to protect Leena from a Charged Particle-induced explosion, only to be pushed out of the way by Dr. Laon's Whale King.
The elite guard of the Backdraft Group, accompanying Altile's Dark Horn to the Fuma Team's hideout, would be seen with identical Iron Kongs, which were quickly dispatched by the Fuma Team's Warsharks in a single blow.
Iron Kongs appeared on several occasions in Zoids: Fuzors. All the examples in Fuzors sported the same unique colour scheme and weapons configuration as Karl Schubaltz’s Zoid from Chaotic Century. Nearly all the Iron Kongs in Fuzors were treated as cannon fodder Zoids; at one point nine Iron Kongs proved unable to damage the Gairyuki Destroy despite the Zoid not even deploying an energy shied.
Comics and MangaEdit
UK Zoids ComicEdit
In the UK Zoids comic, Gore the Lord Protector was created by the Blue Zoids' automated factories to counter the growing threat of the Red Mutant Army. Gore was assigned to work alongside Zoidzilla, but the latter tended to see him as a rival. While somewhat slow-witted, Gore was firm in his resolve that the Red Mutant Army should be destroyed. Unlike Zoidzilla, who tended to work on his own, Gore was more of a leader to the Blue Zoids.
Gore was very effective in battle against the Red Mutants. However, against Silverman and the Black Zoid, he was less successful, being decapitated in a single blow.
It is unclear if this damage "killed" Gore or if he could be rebuilt. A promotional mini-comic set after then end of the UK comic does feature Gore, but the canonicity of this comic is dubious.
Zoids Web ComicEdit
A Neo-Zenebas Empire Iron Kong based on the Mk II converted for arctic warfare featured in the Zoids Web Comic produced by TOMY Japan. This design was known as the Iron Kong Yeti, and was later released as a limited edition model (albeit without the shoulder-mounted gattling gun shown in the Web Comic).
The Iron Kong, along with the numerous variants featured within the model range and in the anime series’, appear in the Zoids Saga series of Game Boy Advance games, and in the Zoids VS series of GameCube games. In addition, the Iron Drill, a Mandrill-type Zoid based on the Iron Kong design, appears in Zoids Legacy.
Zoids Legacy Stats for Iron Kong PK: Length: 19.1m, Weight: 209.0t, Speed: 170km/h
Zoids Legacy Stats for Iron Kong MS: Length: 11.5m, Weight: 195.0t, Speed: 180km/h
Zoids Legacy Stats for Iron Kong SS: Length: 11.5m, Weight: 192.0t, Speed: 160km/h
Zoids Legacy Stats for Iron Drill: Length: 19.3m, Weight: 220.0t, Speed: 150km/h
The Iron Kong was featured in all four of the Zoids Trading Cards releases. Iron Kong PK was also featured in the Original Battle Game and Trading Collection Cards. Iron Kong Yeti was featured in the Zoids Scramble release.
The Iron Kong was released as part of the Zoids (1983) line. It was introduced in 1983, and was produced up until about 1986.
The Iron Kong kit comes on six frames, along with a battery-powered motor with light, a second battery box, canopy cover, thirty-two rubber caps, a small spring, a frame of six missiles, two small chromed pilots, and label sheets. The Iron Kong is moulded in maroon and black, with grey weapons and a red canopy.
The Iron Kong uses a pair of “AA” sized batteries for motion. Once activated, the Zoid walks forwards, its head tuning side to side, a missile launcher on the back rotating and the Zoid making a screeching noise. A second pair of “AA” Batteries are used to power a red light in the Iron Kong’s head.
The Iron Kong has a spring-loaded missile launcher on its right shoulder, while its left shoulder has a small launcher concealed under an armoured panel.
Like several other Zoids of the time, the Iron Kong could use a number of different optional weapons that were included in the Empire Customise Set.
Spider-Man and ZoidsEdit
The Iron Kong was released as part of the Spider-Man and Zoids line. Introduced in 1985-87, it bore the name Gore the Lord Protector. This version featured a different colour scheme, with grey replacing the red. The pilots were gold instead of silver, and it came with a new label sheet with Helic logos instead of Zenebas ones. Additionally, the spring-loaded missile launcher was replaced with a different weapon.
The Iron Kong was released in the US as a part of the Robo Strux line under the name Badox. This version used a different colour scheme, with blue replacing the red and navy replacing the black. Badox had the same shoulder weapon as Gore, as well as a chromed version of the weapons frame included with the Red Horn.
Iron Kong Mk-2 Mass Production TypeEdit
In 1987, TOMY introduced a new version of the Iron Kong, replacing the existing one in production. This version had a new colour scheme, with orange replacing the red and the black armour being a more charcoal colour. It also featured new parts, with a large thruster backpack added to the back of the Zoid, and a new missile cover on the left shoulder.
The Iron Kong MK-2P had a revised motor, using a single “C” cell battery in place of the two “AA” batteries. This improved the Zoid’s walking speed. This improvement was carried over to all subsequent versions of the Iron Kong.
Iron Kong Mk-2 Limited TypeEdit
A limited edition version of the Iron Kong MK-2R was in 1986. This version sported a metallic red and dull grey colour scheme. In addition to the thruster pack from the Mk II, the Mk II Limited featured an extra frame of new weapons.
The Iron Kong MK-2 Limited Type is possibly the rarest Zoid ever released in Japan; examples have gone for over $2,500 on eBay.
Another version of the Iron Kong was released in the U.S. and Canada in 1994 as a part of the Technozoids line. This version had a silver and yellow colour scheme, and lacked a spring for the missile launcher, but still had the missiles which were now coloured in a bright orange.
A new version of the Iron Kong was also released as a part of the Zoids 2 line. This version had a black, red and chrome gold colour scheme and red eyes, but was otherwise identical to previous versions. The chrome colour scheme is highly variable and can range from gold to copper. Unlike previous non-Japanese versions, the Zoids 2 Iron Kong retained the fully-functional missile launcher's spring.
The Iron Kong was released in Japan as part of the Zoids (1999) line. Introduced in 1999, this version was dull metallic grey and dull red, with dull grey weapons, green eyes, and blue pilots.
TOMY also released an upgrade kit for the Iron Kong, the CP-11 Manoeuvre Thruster. The CP-11 is identical to the thruster pack originally included in the Iron Kong MK-2.
Several chromed version were released by independent companies.
Iron Kong PKEdit
This version was released in Japan as a limited edition model in 2000. This version contains all the parts from the Iron Kong Mk II Limited, but is coloured in alizarin, with a black and grey structure, grey weapons, and green eyes. PK stood for Prozen Knights (AKA Proitzen Knights).
The Iron Kong was released as part of the first wave of Gachapon minis. The Iron Kong MK-2 was also released as part of Wave Eight.
Iron Kong YetiEdit
This version was released in Japan as a limited edition model in December 2002, a part of the 'Yuji Kaida' series. This version is identical in design and parts to the Iron Kong MK-2 Mass Production Type, but with a white and dark grey color scheme and green eyes. As its name says, the Iron Kong Yeti is influenced by the Yeti, a myth from the Himalayas about a giant, white, ape-like monster. It is the third kit in the line.
Zoids: Build Customize MobilizeEdit
The Iron Kong was released as part of the Zoids: Build Customize Mobilize line. Introduced in the US in 2002, as a Toys "R" Us exclusive. This version was based on the 1999 version, with a similar colour scheme, but had several changes. It lacked the spring for the launcher, and had a different battery pack for the lights that featured a screw-shut cover and a separate power switch for the lights. The changes in the backpack made the model incompatible with the CP-11 upgrade without modification. The model kit also included the "extra" weapons frame found on the PK and Mk II Limited variants (however, it did not include the CP-11 or hoses).
The Hasbro instruction manual used stickers to show how to assemble the "extra" weapons, rather than re-print the entire manual from the Japanese version.
Toy's Dream ProjectEdit
In 2005, Toy's Dream Project released an Iron Kong Mk-2. This version was identical to the original Mk II.
A Dengeki Hobby Magazine exclusive character that appears in the Zoids: Generations storyline. A custom was made where it was primarily black and gold in colour, and had most of the standard weapons removed. It features a customised visor and sledgehammer-like weapon that replaced the right hand. It never reached production.
The LB Iron Kong was the fourth Zoid in the Legends Series. Stylized after the previous Iron Kongs variants, the LB is set in the scale size of the Neo-Blox Zoids.
The model comes on five frames, one of which was reused from the Bravejaguar, along with three Neo-Blox modules, a clear canopy, a frame of connectors also included with several other Neo-Blox, and a chromed silver pilot. The colours are based on those of the original Iron Kong.
The LB Iron Kong MK-2 was the fifth Zoid released in the Legends Blox line. The kit is recolored to resemble the Iron Kong Mk II Limited. It includes two new frames of weapons designed to resemble the parts on the original kit. Two sets of translucent components were included; one red and one green.
Dark Iron KongEdit
A promotional kit used to advertise Takara Tomy's Dark Zoids Army. It never reached mass production.
Anime 10th EditionEdit
TT released an Iron Kong Schubaltz Custom as part of the Anime 10th Edition line. It features a CP-03, using a custom mount as well as an anime-accurate color scheme. It is the only Zoid to include the rare customise part CP-A1, which allows the Iron Kong to be equipped with the CP-03.
Prototype Iron KongEdit
Little is known about this model. The kit was primarily black with purple details and orange caps. Apparently, a model was sold in Yahoo Japan.
High-end Master ModelEdit
The HMM Iron Kong was released in December 2009. It was the largest HMM kit in the line at the time, and features multiple articulations and meticulous detailing seen only in the series. The HMM versions listed here and below add a second 10-shot rocket bomb launcher in the left shoulder.
In June 2013, Kotobukiya released an EZ-015 Iron Kong Schwarz Ver. kit which retailed for 12,000 Japanese Yen. It is based on Karl L. Schubaltz's Iron Kong that he used in the Zoids: Chaotic Century anime series. Kotobukiya will reissue this kit in August 2017.
In August 2016, Kotobukiya released a 1/72 scale High-end Master Model of the Iron Kong PK. The model retailed for 16,800 Japanese Yen.
Kotobukiya released a 1/72 scale HMM version of the Iron Kong Yeti as of June 2020.
D-Style Zoids are smaller then most released Zoids and have large "Chibi" heads similar to Bandai's Super Deformed series of Gundam.
The Iron Kong is a Gorilla-type ZOID, one of the rare ZOIDS developed in the image of wild species. It is well equipped for leading the charge into battle with its superior hand-to-hand combat, high-speed and maneuverability. The three spinning saws equipped on its arms allow it to move through almost any terrain, allowing it to cut a path through the Helic Republic for friendly soldiers.
Threezero has sculpted this Iron Kong based on the designs found in the publication "ZOIDS concept art." They have kept all the finest details, but shrunk the design down to 1/72nd scale, which makes the model stand 26cm in height. The weathered paintwork gives the figure a truly metallic texture, making it look incredibly realistic.
The figure also boasts over 50 points of articulation, including his mouth, arms, the spinning saws, his fingers and parts of the backpack. Two pilots are included and can ride inside the cockpit, and the cockpit and eyes also feature a light-up effect (batteries sold separately).